Chapter 1 Product Overview
Switch Features
1-4
Catalyst 4000 Series Switch Installation Guide
78-6120-10
Embedded management
•
Full SNMP implementation, including entity-MIB, all relevant standard
MIBs, and all relevant Cisco MIBs
•
The first four RMON groups (Ethernet statistics, Alarms, Events, and
History supported) on a per-port basis without an optional RMON
processing module
•
SPAN, allowing redirection of traffic from any port or VLAN to a SPAN
destination port
•
Performance management information
Power supplies
•
One standard 400 W, 12 V output, hot-swappable, load-sharing
redundant power supplies with AC power factor correction
•
Optional 400 W, 12 V output DC power supplies
•
Optional 650 W, 12 V output DC power supplies
•
PoE is not supported on the Catalyst 4003
Supervisor engine
•
Supports the Supervisor Engine I (WS-X4012)
•
Data path and control for all network interfaces with Ethernet
management and console ports
•
Interface monitoring, environmental status, and SNMP and
console/Telnet interface
Note
Packets are not forwarded while the supervisor engine is removed; a
system reboot occurs when a supervisor engine is reinserted.
•
Gigabit Ethernet (1000BASE-X) interface for backbone interconnection
of high-performance switches and routers
Table 1-1
Features of the Catalyst 4003 Switch (continued)
Feature
Description
