1-9
Catalyst 4000 Series Switch Installation Guide
78-6120-10
Chapter 1 Product Overview
Switch Features
Embedded
management
•
Full SNMP implementation, including entity-MIB, all relevant standard
MIBs, and all relevant Cisco MIBs
•
The first four RMON groups (Ethernet statistics, Alarms, Events, and
History) on a per-port basis without an optional RMON processing
module
•
SPAN, allowing you to redirect traffic from any port or VLAN to a SPAN
destination port
•
Performance management information
Power supplies
•
Three 400 W, 12 V output, hot-swappable, load-sharing power supplies
with AC power factor correctionOptional 400 W, 12 V output DC power
supplies
•
Optional 650 W, 12 V output DC power supplies
Supervisor engine
•
Supports the Supervisor Engine II (WS-X4013), Supervisor Engine III
(WS-X4014), and Supervisor Engine IV (WS-X4515)
•
Data path and control for all network interfaces with Ethernet
management and console ports
•
Interface monitoring, environmental status, and SNMP and
console/Telnet interface
Note
Packets are not forwarded while the supervisor engine is removed; a
system reboot occurs when a supervisor engine is reinserted.
•
32-port full-duplex Gigabit Ethernet switching engine
•
Two Gigabit Ethernet (1000BASE-X) interfaces for backbone
interconnection of high-performance switches and routers
Table 1-2
Features of the Catalyst 4006 Switch (continued)
Feature
Description
