Cisco Catalyst 3850, Руководство пользователя

Страница: 92 / 120

Converged Wired and Wireless Access
Enable the Switch as a Wireless Controller
84
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
Figure 13 LAN Access Switch Topology with Wireless Connectivity
Enable the Switch as a Wireless Controller
•
Install Access Point Licenses on the Switch
• Configure a Wireless Management VLAN
•
Configure Service Connectivity
• Enable Wireless Controller Functionality
•
Change a Switch to Run in Mobility Controller Mode
• Enable the Access Point Connections
Install Access Point Licenses on the Switch
For ease of use, an evaluation license is preinstalled on your switch, but you are required to accept the
End-User-License Agreement (EULA) before the 90-day period expires.
The IP Base and IP Services image-based licenses support wireless functionality. The minimum license
level for wireless functionality is IP Base.
The total AP-count license of a switch stack is equal to the sum of all the individual member AP-count
licenses, up to a maximum of 50 AP-count licenses.
The total AP-count license of the stack is affected when stack members are added or removed:
• When a new member is added to the stack that has an existing AP-count license, then the total
available AP-count license for the switch stack is automatically recalculated.
•
When members are removed from the stack, the total AP-count license is decremented from the total
available AP-count license in the stack.
Dual redundant
routers running
HSRP
Desktop user
direct connect
Desktop user
behind IP phone
Printer
Wireless access
Catalyst 3850 stack in access
DHCP Server ISE
Voice VLAN 11
Data VLAN 10
Data VLAN 10
Data VLAN 10
Switch management
VLAN 100
Access point VLAN 12
391701
Trunk link
Native VLAN 999
All VLANs included