Cisco Catalyst 3850, Руководство пользователя

Страница: 106 / 120

Converged Wired and Wireless Access
Provisioning a Small Branch WLAN
98
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
Step 4 Verify that Clean Air is enabled on devices.
.
Enable Dynamic Channel Assignment
Step 5
Make sure that the wireless 2.4-Ghz and 5-Ghz networks are shut down, as described in the “Disable
Low Data Rates” section.
Step 6
Enable Dynamic Channel Assignment (DCA) on both the 2.4-Ghz and 5-Ghz wireless spectrums to
optimize channel assignments on radios for interference-free operation. For the 5-Ghz spectrum, enable
channel bonding to increase throughput.
DCA uses over-the-air metrics reported by each radio on every possible channel and provides a solution
that maximizes channel bandwidth and minimizes radio frequency interference from all sources: self
(signal), other networks (foreign interference), and noise (everything else).
.
Associate WLAN Clients
Step 7
Association of WLAN clients is done on the end-client device by choosing the appropriate SSID and
supplying the required credentials for authentication. Client connectivity depends on the type of device
used which can be verified by looking at the wireless network interface details.
show ap dot11 24ghz cleanair config
show ap dot11 5ghz cleanair config
ap dot11 24ghz rrm channel dca global auto
ap dot11 5ghz rrm channel dca global auto
ap dot11 5ghz shutdown
ap dot11 5ghz rrm channel dca chan-width 80
no ap dot11 5ghz shutdown