
31-47
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Chapter 31 Configuring IP Unicast Routing
Configuring BGP
Distribute list
•
In (filter networks received in updates): Disabled.
•
Out (suppress networks from being advertised in updates): Disabled.
Internal route redistribution
Disabled.
IP prefix list
None defined.
Multi exit discriminator (MED)
•
Always compare: Disabled. Does not compare MEDs for paths from neighbors in
different autonomous systems.
•
Best path compare: Disabled.
•
MED missing as worst path: Disabled.
•
Deterministic MED comparison is disabled.
Neighbor
•
Advertisement interval: 30 seconds for external peers; 5 seconds for internal peers.
•
Change logging: Enabled.
•
Conditional advertisement: Disabled.
•
Default originate: No default route is sent to the neighbor.
•
Description: None.
•
Distribute list: None defined.
•
External BGP multihop: Only directly connected neighbors are allowed.
•
Filter list: None used.
•
Maximum number of prefixes received: No limit.
•
Next hop (router as next hop for BGP neighbor): Disabled.
•
Password: Disabled.
Neighbor
•
Peer group: None defined; no members assigned.
•
Prefix list: None specified.
•
Remote AS (add entry to neighbor BGP table): No peers defined.
•
Private AS number removal: Disabled.
•
Route maps: None applied to a peer.
•
Send community attributes: None sent to neighbors.
•
Shutdown or soft reconfiguration: Not enabled.
•
Timers: keepalive: 60 seconds; holdtime: 180 seconds.
•
Update source: Best local address.
•
Version: BGP version 4.
•
Weight: Routes learned through BGP peer: 0; routes sourced by the local router:
32768.
Route reflector
None configured.
Synchronization (BGP and IGP)
Enabled.
Table map update
Disabled.
Timers
Keepalive: 60 seconds; holdtime: 180 seconds.
Table 31-11 Default BGP Configuration (continued)
Feature
Default Setting