Cisco Catalyst Switch Modules 3110G and 3110X for IBM BladeCenter
9
On-board failure logging (OBFL) to collect information about the switch and the power supplies
z
connected to it.
Enhanced object tracking (EOT) for HSRP to determine the proportion of hosts in a LAN by
z
tracking the routing table state or to trigger the standby router failover.
IP Service Level Agreements (IP SLAs) support to measure network performance by using active
z
traffic monitoring (IP services feature set is required).
IEEE standards
z
The Cisco Catalyst Switch Modules 3110G and 3110X support the following IEEE standards:
IEEE 802.1d Spanning Tree Protocol (STP)
z
IEEE 802.1s Multiple STP (MSTP)
z
IEEE 802.1w Rapid STP (RSTP)
z
IEEE 802.1p CoS prioritization
z
IEEE 802.1Q Tagged VLAN (frame tagging on all ports when VLANs are enabled)
z
IEEE 802.1x port-based authentication
z
IEEE 802.2 Logical Link Control
z
IEEE 802.3 10BASE-T Ethernet
z
IEEE 802.3u 100BASE-TX Fast Ethernet
z
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
z
IEEE 802.3z 1000BASE-X
z
IEEE 802.3ad Link Aggregation Control Protocol
z
IEEE 802.3x Full-duplex Flow Control on all ports
z
IEEE 802.3ae 10GBASE-SR 10 Gb Ethernet (3110X only)
z
