manualshive.com logo in svg

Cisco Catalyst 2928, Руководство по настройке программного обеспечения

Скачайте бесплатное руководство по настройке программного обеспечения для Cisco Catalyst 2928 на manualshive.com. Этот мануал поможет вам разобраться с функциональностью продукта и оптимизировать его работу. Не упустите возможность загрузить его сейчас, чтобы использовать все возможности вашего оборудования.

Поделиться
Скачать
background image

 

3-7

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Chapter 3      Assigning the Switch IP Address and Default Gateway

Assigning Switch Information

Configuring the TFTP Server

Based on the DHCP server configuration, the switch attempts to download one or more configuration 
files from the TFTP server. If you configured the DHCP server to respond to the switch with all the 
options required for IP connectivity to the TFTP server, and if you configured the DHCP server with a 
TFTP server name, address, and configuration filename, the switch attempts to download the specified 
configuration file from the specified TFTP server.

If you did not specify the configuration filename, the TFTP server, or if the configuration file could not 
be downloaded, the switch attempts to download a configuration file by using various combinations of 
filenames and TFTP server addresses. The files include the specified configuration filename (if any) and 
these files: network-config, cisconet.cfg, 

hostname

.config, or 

hostname

.cfg, where 

hostname

 is the 

switch’s current hostname. The TFTP server addresses used include the specified TFTP server address 
(if any) and the broadcast address (255.255.255.255).

For the switch to successfully download a configuration file, the TFTP server must contain one or more 
configuration files in its base directory. The files can include these files:

•

The configuration file named in the DHCP reply (the actual switch configuration file).

•

The network-confg or the cisconet.cfg file (known as the default configuration files).

•

The router-confg or the ciscortr.cfg file (These files contain commands common to all switches. 
Normally, if the DHCP and TFTP servers are properly configured, these files are not accessed.)

If you specify the TFTP server name in the DHCP server-lease database, you must also configure the 
TFTP server name-to-IP-address mapping in the DNS-server database.

If the TFTP server to be used is on a different LAN from the switch, or if it is to be accessed by the switch 
through the broadcast address (which occurs if the DHCP server response does not contain all the 
required information described previously), a relay must be configured to forward the TFTP packets to 
the TFTP server. For more information, see the 

“Configuring the Relay Device” section on page 3-7

. The 

preferred solution is to configure the DHCP server with all the required information.

Configuring the DNS

The DHCP server uses the DNS server to resolve the TFTP server name to an IP address. You must 
configure the TFTP server name-to-IP address map on the DNS server. The TFTP server contains the 
configuration files for the switch. 

You can configure the IP addresses of the DNS servers in the lease database of the DHCP server from 
where the DHCP replies will retrieve them. You can enter up to two DNS server IP addresses in the lease 
database.

The DNS server can be on the same or on a different LAN as the switch. If it is on a different LAN, the 
switch must be able to access it through a router.

Configuring the Relay Device

You must configure a relay device, also referred to as a 

relay agent

, when a switch sends broadcast 

packets that require a response from a host on a different LAN. Examples of broadcast packets that the 
switch might send are DHCP, DNS, and in some cases, TFTP packets. You must configure this relay 
device to forward received broadcast packets on an interface to the destination host. 

If the relay device is a Cisco router, enable IP routing (

ip routing

 global configuration command), and 

configure helper addresses by using the 

ip helper-address

 interface configuration command.

Содержание Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 2928

D-Link DSL-504T Manual preview
DSL-504T
Бренд: D-Link Страницы: 99
D-Link DI-804V Datasheet preview
DI-804V
Бренд: D-Link Страницы: 5
D-Link DES-1210-08P Manual preview
DES-1210-08P
Бренд: D-Link Страницы: 15
D-Link AirPro DWL-6000AP Manual preview
AirPro DWL-6000AP
Бренд: D-Link Страницы: 65
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Бренд: QTech Страницы: 120
Paradyne Hotwire 5100 User Manual preview
Hotwire 5100
Бренд: Paradyne Страницы: 45
TP-Link TD-8817 User Manual preview
TD-8817
Бренд: TP-Link Страницы: 73
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Бренд: Funkwerk Страницы: 2
LogLogic LX 1010 Quick Start Manual preview
LX 1010
Бренд: LogLogic Страницы: 30
Mercusys MR30G Quick Installation Manual preview
MR30G
Бренд: Mercusys Страницы: 35
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Бренд: Supermicro Страницы: 27
Abocom WR5502 User Manual preview
WR5502
Бренд: Abocom Страницы: 63
FOR-A MFR-1616 Quick Start Manual preview
MFR-1616
Бренд: FOR-A Страницы: 2
Top RAMS1000 User Manual preview
RAMS1000
Бренд: Top Страницы: 21
Digisol DG-BG100 User Manual preview
DG-BG100
Бренд: Digisol Страницы: 81
Alphatech Blue Gate ISDN BRI Brave Quick Start Manual preview
Blue Gate ISDN BRI Brave
Бренд: Alphatech Страницы: 6
Firetide HotPort 3103 User Manual preview
HotPort 3103
Бренд: Firetide Страницы: 32
CTC Union Skywave Instruction preview
Skywave
Бренд: CTC Union Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды