Cisco ASR-920-20SZ-M, Руководство по установке оборудования

Страница: 72 / 80

Description Direction Signal
Name Pin
Not used — — 7
Not used — — 8
GPS Port Pinouts
The following table summarizes the GPS port pinouts.
The 10 Mhz and 1 PPS interfaces can be configured as input or output using Cisco IOS CLI commands. For
more information, see the
Cisco ASR 920 Series Aggregation Services Router Configuration Guide .
Note
Table 8: GPS Port Pinout
1PPS (input and output) 10 Mhz (input and output)
Input—Pulse shape
Output—Pulse shape
Input—Sine wave
Output—Sine or square wave
Waveform
Input— > 2.4 volts TTL compatible
Output— > 2.4 volts TTL compatible
Input— > 1.7 volt p-p (+8 to +10 dBm)
Output— > 2.4 volts TTL compatible
Amplitude
50 ohms 50 ohms Impedance
26 microseconds 50% duty cycle Pulse
Width
40 nanoseconds Input—AC coupled
Output—5 nanoseconds
Rise Time
Time-of-Day Port Pinouts
The following table summarizes the ToD/1-PPS port pinouts.
Table 9: RJ-45 1PPS/ToD Port Pinouts
Description Direction Signal
Name Pin
Do Not Connect Output RESERVED 1
Do Not Connect Input RESERVED 2
1PPS RS422 signal Output or
Input 1PPS_N 3
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
66
Troubleshooting Aids
GPS Port Pinouts