Cisco ASR 903, Руководство по установке, Страница: 58 / 200

This product is intended for use in a normal environment based on the standard IEC 60950-1. Do not use the
product in vehicles, on board ships, in aircrafts or in medical applications with physical connection to the
patient, nor in environments with exposure to moisture, dust, vibration or ingress of water. Statement 0418 Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement
1001 Warning
Read the installation instructions before connecting the system to the power source. Statement 1004 Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety: This unit
should be mounted at the bottom of the rack if it is the only unit in the rack. When mounting this unit in a
partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of
the rack. If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack. Statement 1006
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement 1023 Warning
If the symbol of suitability with an overlaid cross appears above a port, you must not connect the port to a
public network that follows the European Union standards. Connecting the port to this type of public network
can cause severe injury or damage your router. Statement 1031 Warning
Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in
a wet basement, or near a swimming pool. Statement 1035 Warning
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Statement 1036
Warning
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
48
Preparing for Installation
Standard Warning Statements