Change Summary
Date
Rivision
Added information about the installation of air plenum and
the Cisco Microsoft Windows 7 USB driver, RSP-2 LED
behavior, and new interface modules supported. Updated the
description for Time-of-Day port pinouts.
OL-31440-02
OL-31440-02
Initial release
February 14, 2014
OL-31440-01
Document Audience
This guide is intended for users who are responsible for installing the Cisco router. It is intended for users
who may not be familiar with the initial configuration and troubleshooting tasks, the relationship among tasks,
or the Cisco IOS software commands necessary to perform particular tasks.
For information on general software features that are also available on other Cisco platforms, see the Cisco
IOS XE technology guide pertaining to that specific software feature.
Document Organization
This guide includes the following chapters and appendix:
Description
Title
This chapter provides an overview of the Cisco ASR
902 and ASR 902U Routers.
Chapter 1,
This chapter provides site preparation guidelines for
installing the Cisco ASR 902 and ASR 902U Routers.
Chapter 2,
Preparing for Installation, on page 39
”
This chapter describes the Cisco ASR 902 and ASR
902U Routers and how to install it.
Chapter 3,
Installing the Cisco ASR 902 Router, on
page 65
”
This chapter describes how to start the Cisco ASR
902 and ASR 902U Routers and create an initial
system configuration.
Chapter 4,
Cisco Router Initial Configuration, on
page 113
”
This chapter provides LED and pinout information
for troubleshooting purposes.
Chapter 5,
This provides a site log for tracking the installation
and maintenance activities of the router.
Appendix A,
”
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
xii
Preface
Document Audience
