Cisco ASR 1001-X Скачать руководство пользователя страница 110

Страница: 110 / 152

This completes the USB Flash memory installation procedure.

Removing and Replacing the Cisco ASR 1001-X Router DIMM

This section describes how to replace the DIMMs on the Cisco ASR 1001-X Router.

The Cisco ASR 1001-X Router supports an 8-GB and 16-GB configuration.

Note

You might have to upgrade a DIMM for the following reasons:

•

You have upgraded to a new Cisco IOS feature set or release that requires more memory.

•

You are using very large routing tables or many protocols.

Removing and Replacing the Cisco ASR 1001-X Router DIMM Memory Module

Perform the following steps before you begin the process of removing and replacing a DIMM memory module:

•

Use an ESD-preventive wrist strap.

•

Back up the data that you want to save.

•

Remove the power supplies before you remove the chassis top cover.

The top cover cannot be removed until the power supplies are removed from the chassis. The chassis has
a safety mechanism built in to prevent the removal of the top cover until the power supplies are removed.

Caution

•

The DIMM component is keyed and slotted for easier connection.

•

The Cisco ASR 1001-X Router has two DIMM slots.

The below table shows the slots that are supported for inserting the memory DIMMs in the Cisco ASR1001-X
Router.

Table 23: Supported Slots for Inserting the DIMMs

Slot 1 (U103D)

Slot 0 (U101D)

Memory PID Option

4 GB

U1D0

8 GB

U1D1

Cisco ASR 1001-X Router Hardware Installation Guide

102

Removing and Replacing FRUs from the Cisco ASR 1001-X Router

Removing and Replacing the Cisco ASR 1001-X Router DIMM

Содержание ASR 1001-X
























































































































































Результаты поиска

Содержание ASR 1001-X

Отзывы:

Cisco ASR 1001-X, Руководство по установке оборудования, Страница: 110 / 152

Результаты поиска

Содержание ASR 1001-X

Отзывы: