Cisco AMP Threat Grid Appliance Setup and Configuration Guide
CONFIGURATION WIZARD - OPADMIN PORTAL
29
End User License Agreement
1.
Review the End User License Agreement.
2.
Scroll down to the end, and click
I HAVE READ AND AGREE
. The
License
page opens:
Figure 18 - License Page
We recommend that you follow the configuration workflow, and
configure the networks before you install
the license
, as described in the next section, Network Configuration Settings.
Network Configuration Settings
If you configured your static network settings in the TGSH Dialog, the IP addresses displayed in the
Network Configuration page will reflect the values you entered in the TGSH Dialog during the appliance
network configuration.
Network Configuration and DHCP
If you used DHCP for your initial connection and now need to change the Clean and Dirty IP networks to
static IP addresses, then follow the steps in the section:
Networking > Using DHCP
, located in the
Threat
Grid Appliance Administrator's Guide
.
