Cisco AMP Threat Grid Appliance Setup and Configuration Guide
SERVER SETUP
19
Note:
If you want to configure this interface, press
F8
after the memory check is completed, and follow the
instructions provided in the section,
CONFIGURING CIMC (Optional)
.
The
TGSH Dialog
is displayed on the console when the server has successfully booted up and connected:
Figure 9 - TGSH Dialog
The Admin URL shows as unavailable - the network interface connections are not yet configured and the
OpAdmin Portal cannot be reached yet to perform this task.
Note:
Make a note of the administrator Password into a separate text file for convenience (copy-paste)
during the OpAdmin Portal configuration steps.
IMPORTANT:
The
TGSH Dialog
displays the initial administrator password, which will be needed in order to
access and configure the OpAdmin Portal interface later in the configuration workflow steps.
