Cisco Aironet 1100 Series Скачать руководство пользователя страница 189 | Manualshive

Страница: 189 / 320

Cisco Aironet 1100 Series Скачать руководство пользователя страница 189

15-7

Cisco Aironet 1100 Series Access Point Installation and Configuration Guide

OL-2851-01

Chapter 15 Configuring Filters

Configuring Filters Using the Web-Browser Interface

Step 4

Select

Forward all

or

Block all

as the filter’s default action from the Default Action menu. The filter’s

default action must be the opposite of the action for at least one of the addresses in the filter. For
example, if you create a filter containing an IP address, an IP protocol, and an IP port and you select

Block

as the action for all of them, you must choose

Forward All

as the filter’s default action.

Step 5

To filter an IP address, enter an address in the IP Address field.

Note

If you plan to block traffic to all IP addresses except those you specify as allowed, put the
address of your own PC in the list of allowed addresses to avoid losing connectivity to the access
point.

Step 6

Type the subnet mask for the address in the Mask field. Enter the mask with periods separating the three
groups of four characters (1122.3344.5566, for example).

Step 7

Select

Forward

or

Block

from the Action menu.

Step 8

Click

Add

. The address appears in the Filters Classes field. To remove the address from the Filters

Classes list, select it and click

Delete Class

. Repeat

Step 5

through

Step 8

to add addresses to the filter.

If you do not need to add IP protocol or IP port elements to the filter, skip to

Step 15

to save the filter

on the access point.

Step 9

To filter an IP protocol, select one of the commmon protocols from the IP Protocol drop-down menu, or
select the

Custom

radio button and enter the number of an existing ACL in the Custom field. Enter an

ACL number from 0 to 255. See

Appendix E, “Protocol Filters,”

for a list of IP protocols and their

numeric designators.

Step 10

Select

Forward

or

Block

from the Action menu.

Step 11

Click

Add

. The protocol appears in the Filters Classes field. To remove the protocol from the Filters

Classes list, select it and click

Delete Class

. Repeat

Step 9

to

Step 11

to add protocols to the filter.

If you do not need to add IP port elements to the filter, skip to

Step 15

to save the filter on the access

point.

Step 12

To filter a TCP or UDP port protocol, select one of the commmon port protocols from the TCP Port or
UDP Port drop-down menus, or select the

Custom

radio button and enter the number of an existing

protocol in one of the Custom fields. Enter a protocol number from 0 to 65535. See

Appendix E,

“Protocol Filters,”

for a list of IP port protocols and their numeric designators.

Step 13

Select

Forward

or

Block

from the Action menu.

Step 14

Click

Add

. The protocol appears in the Filters Classes field. To remove the protocol from the Filters

Classes list, select it and click

Delete Class

. Repeat

Step 12

to

Step 14

to add protocols to the filter.

Step 15

When the filter is complete, click

Apply

. The filter is saved on the access point, but it is not enabled until

you apply it on the Apply Filters page.

Step 16

Click the

Apply Filters

tab to return to the Apply Filters page.

Figure 15-4

shows the Apply Filters page.

«
...
187
188
189
190
191
...
»

Содержание Aironet 1100 Series

































































































































































































































































































































Отзывы:

Нет отзывов