![background image](http://html.mh-extra.com/html/cisco/air-wlc4402-12-k9/air-wlc4402-12-k9_installation-and-configuration-manual_64449030.webp)
Installation and Configuration
Logging In
20
Cisco 4400 Series Wireless LAN Controllers - Installation and Configuration Guide
78-17157-01
Logging In
Perform the steps below to log into the controller:
Step 1
Enter a valid login and password to enter the CLI.
User:
Password:
Note
The login and password functions are case sensitive. The default Administrative User login and
password are
admin
and
admin
, respectively.
Step 2
The CLI displays the root level system prompt:
(system prompt)>
The system prompt can be any alphanumeric string up to 31 characters. You can change it entering
the following command:
(system prompt)>
config prompt
Because this is a user-defined variable, it is omitted from the rest of this documentation.
Step 3
The CLI automatically logs you out without saving any changes after 5 minutes of inactivity. This
automatic logout can be set from 0 (never log out) to 160 minutes using the following command:
(system prompt)>
config serial timeout
Refer to the
Navigating the CLI
and
Logging Out of the CLI
sections in the
Product Guide
for more
information.