Index
IN-3
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
config 802.11b txPower command
9-26
config 802.11b txPower global command
9-23
config ap mode command
9-15
config interface acl ap-manager command
3-13
config interface acl management command
3-12
config interface address ap-manager command
3-13
config interface address management command
3-12
config interface address service-port command
3-14
config interface address virtual command
3-13
config interface commands
3-16, 3-17
config interface dhcp ap-manager command
3-13
config interface dhcp management command
3-12
config interface dhcp service-port command
3-14
config interface dhcp service-port none command
3-14
config interface hostname virtual command
3-13
config interface port ap-manager command
3-13
config interface port management command
3-12
config interface vlan ap-manager command
3-13
config interface vlan management command
3-12
config lag commands
3-30
config mobility group anchor command
10-14
config mobility group member
10-11
config mobility group name command
10-11
config network rf-network-name command
9-8
config route command
3-14
config spanningtree commands
3-26, 3-27
configurations, saving
8-4
configuration wizard
4-2
config wlan disable command
3-12, 3-13, 3-16
config wlan mobility anchor command
10-14
config wps ap-authentication command
9-15
controller discovery using DNS
7-7
Controller Network Module
ports
3-3, 3-4
using
4-12
Controller Spanning Tree Configuration page
3-24
country channels
9-21
country code, configuring
4-5
Coverage Exception Level threshold parameter
9-20
coverage hole, detection
9-4
Coverage Measurement parameter
9-22
Coverage threshold parameter
9-20
D
Data Rate threshold parameter
9-20
DCA channels
9-21
declarations of conformity
B-1
Default Mobility Group parameter
10-9
default settings, resetting to
4-3
default username
4-3
Designated Root parameter
3-24
DFS
7-8
DHCP
5-7
DHCP server, assigning WLAN to
6-3
Diffie-Hellman
6-7
disable web-based management
2-5
distribution system ports
described
3-3 to 3-4
DNS for controller discovery
7-7
DTPC
4-8
dynamic channel assignment
9-3
dynamic interface
configuring using the CLI
3-16 to 3-17
configuring using the GUI
3-14 to 3-16
described
3-7
dynamic RRM
See radio resource management (RRM)
9-15
dynamic transmit power control
9-4
dynamic WEP
6-4
E
Enable AP Neighbor Authentication parameter
9-14
Enable Dynamic AP Management parameter
3-36
error messages
D-1