Contents
v
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
OL-5048-02
C H A P T E R
5
Configuring the Access Point/Bridge for the First Time
5-1
Before You Start
5-2
Resetting the Access Point/Bridge to Default Settings
5-2
Default IP Address Behavior
5-2
Default SSID and Default Role
5-3
Obtaining and Assigning an IP Address
5-3
Connecting to the Access Point/Bridge Locally
5-3
Using the Power Injector’s Ethernet Port
5-3
Using the Power Injector’s Console Port
5-4
Assigning Basic Settings
5-4
Default Settings on the Express Setup Page
5-8
Enabling the Radio Interfaces
5-9
Adjusting Output Power Level
5-9
Configuring Basic Security Settings
5-9
Understanding Express Security Settings
5-11
Using VLANs
5-11
Express Security Types
5-11
Express Security Limitations
5-12
Using the Express Security Page
5-13
Finding the IP Address Using the CLI
5-13
Assigning an IP Address Using the CLI
5-14
Using a Telnet Session to Access the CLI
5-14
C H A P T E R
6
Using the Command-Line Interface
6-1
Connecting to the Console Serial Port
6-2
Using a Telnet Session to Open the CLI
6-3
Using Secure Shell to Open the CLI
6-3
IOS Command Modes
6-4
Getting Help
6-5
Abbreviating Commands
6-5
Using no and default Forms of Commands
6-5
Understanding CLI Messages
6-6
Using Command History
6-6
Changing the Command History Buffer Size
6-7
Recalling Commands
6-7
Disabling the Command History Feature
6-7
Using Editing Features
6-8
