C H A P T E R
4-1
Cisco 850 Series and Cisco 870 Series Access Routers Hardware Installation Guide
OL-5331-01
4
Router Cabling Procedures
This chapter describes the cabling procedures for Cisco 851, Cisco 857, Cisco 871, Cisco 876,
Cisco 877, and Cisco 878 routers. It contains the following sections:
•
Cabling for Nonwireless Routers, page 4-2
•
Typical Installations, page 4-2
•
Connecting the Radio Antennas to the Wireless Router, page 4-6
•
Connecting the Power-over-Ethernet Module (Optional), page 4-7
•
Connecting a Server, PC, or Workstation, page 4-8
•
Connecting an External Ethernet Switch (Optional), page 4-9
•
Connecting a Broadband Modem, page 4-11
•
Connecting a Terminal or PC to the Console Port, page 4-12
•
Connecting an Async Modem to the Console Port, page 4-13
•
Connecting an ISDN S/T Port, page 4-14
•
Connecting an ADSL Line—ADSLoPOTS Port, page 4-16
•
Connecting an ADSL Line—ADSLoISDN Port, page 4-17
•
Connecting a G.SHDSL Line, page 4-19
•
Connecting the AC Adapter, page 4-21
•
Verifying Router Operations, page 4-24
•
What to Do Next, page 4-25
Note
Read
Chapter 2, “Preinstallation Information,”
before you start the cabling procedures, making sure to
follow the safety warnings and guidelines in the
“Safety Warnings and Guidelines”
section.
Note
The router and the optional power-over-Ethernet (PoE) module should be mounted before being
connected to the devices. See
Chapter 3, “Router and PoE Module Mounting Procedures.”
