Cisco 819 series, Руководство по установке

Страница: 71 / 84

C H A P T E R
4-1
Cisco 819 Integrated Services Router Hardware Installation Guide
OL-23125-02
4
Initial Configuration
This chapter provides instructions for initial configuration of the Cisco 819 Integrated Services Routers
(ISRs). For the initial configuration, we recommend using
Cisco Configuration Professional (CP) Express. Cisco CP Express is a web-based GUI that guides you
through initial configuration.
You may also initially configure your router by using the Cisco IOS command-line interface (CLI) or by
using the setup command facility. To create the initial configuration, the setup command facility prompts
you for basic information about your router and network.
This chapter contains the following sections:
•
Cisco Configuration Professional Express, page 4-1
• Cisco IOS CLI, page 4-1
•
Setup Command Facility, page 4-3
• Verifying the Initial Configuration, page 4-5
Cisco Configuration Professional Express
After you connect the cables and power up the router, we recommend that you use the Cisco CP Express
web-based application to configure the initial router settings.
For instructions on how to use Cisco CP Express to configure the router, see Cisco CP Express User’s
Guide .
Cisco IOS CLI
To configure the initial router settings by using the Cisco IOS CLI, you must set up a console connection.
For instructions on how to set up a console connection, see the
“Connecting a Terminal or PC to the
Console Port” section on page 3-4 .
To configure the initial router settings using the Cisco IOS CLI, follow these steps:
Step 1 Set up a console connection to your router. The following message is displayed:
...
router con0 is now available