1-33
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Installing Cisco Unified IP Phones
Step 5
Configure these network settings on the phone by
choosing
Settings > Network Configuration
.
To enable DHCP:
•
Set DHCP Enabled to
Yes
•
To use an alternate TFTP server, set Alternate
TFTP Server to
Yes
Enter
IP address
for TFTP Server 1
To disable DHCP:
•
Set DHCP Enabled to
No
•
Enter static
IP address
for phone
•
Enter subnet mask
•
Enter default router IP addresses
•
Enter domain name where phone resides
•
Set Alternate TFTP Server to
Yes
Enter
IP address
for TFTP Server 1
Using DHCP—The IP address is automatically assigned
and the Cisco Unified IP Phone is directed to a TFTP
Server.
Note
Consult with the network administrator if you
need to assign an alternative TFTP server
instead of using the TFTP server assigned by
DHCP.
Without DHCP—You must configure the IP address,
TFTP server, subnet mask, domain name, and default
router locally on the phone.
See the
“Configuring Startup
Network Settings” section on
page 3-17
.
See the
“Network Configuration
Menu” section on page 4-7
.
Step 6
Set up security on the phone.
Provides protection against data tampering threats and
identity theft of phones.
See the
“Configuring Security on the
Cisco Unified IP Phone” section on
page 3-17
.
Table 1-7
Checklist for Installing the Cisco Unified IP Phones 7970 Series (continued)
Configuration Step and Purpose
For More Information
Содержание 7970G - IP Phone VoIP
Страница 4: ......
