2-9
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Chapter 2 Installation of the Cisco IP Conference Station 7935
Installing the Cisco IP Conference Station 7935
Safety Notices
These are the safety considerations for using the IP Conference Station. Read
these notices before you install or use the IP Conference Station. You can also
refer to the Regulatory Compliance and Safety Information for the Cisco IP
Conference Station 7935 for international agency compliance, safety, and
statutory information for the Cisco IP Conference Station 7935.
Warning
Read the installation instructions before you connect the system to its power
source.
Warning
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
Warning
Ultimate disposal of this product should be handled according to all national
laws and regulations.
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
Warning
To avoid electric shock, do not connect safety extra low voltage (SELV) circuits
to telephone network voltage (TNV) circuits. LAN ports contain SELV circuits,
and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45
connectors. Use caution when connecting cables.
Warning
This product relies on the building's installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15 A U.S.
(240 VAC, 10 A international) is used on the phase conductors (all
current-carrying conductors).
Содержание 7935 - IP Conference Station VoIP Phone
Страница 4: ......
Страница 94: ...Index IN 4 Cisco IP Conference Station 7935 Administration Guide 78 12727 03 ...