15
Ad Hoc Conference Call
Ad hoc conferences, which support up to eight parties, are created when one party calls another, then either party decides to
add another party to the call. This is the default behavior. Your system can be configured so that only the conference creator
can add parties to the conference.
The default is that the conference is maintained if three parties remain the conference. Any party can hang up and the conference
is maintained. Your system can be configured so that the conference drops when the creator hangs up. Your system can also be
configured so that the conference drops when the last local party hangs up.
Start a Conference Call
To add new participants to an existing conference:
1.
From a connected call, press
Confrn
. (You may need to press the
more
soft key to see
Confrn
.)
2.
Enter the participant’s phone number.
3.
Wait for the call to connect.
4.
Press
Confrn
again to add the participant to your call.
5.
Repeat to add additional participants.
View a List of Participants
To view a list of conference participants:
1.
Highlight an active conference.
2.
Press
ConfList
. Participants are listed in the order in which they join the conference with the most recent additions at the
top.
3.
To get an updated list of participants, while viewing the conference list, press
Update
.
4.
To see who started the conference, while viewing the conference list, locate the person listed at the bottom of the list with
an asterisk (*) next to the name.
5.
To drop the last party added to the conference, press
RmLstC
. You can remove participants only if you initiated the
conference call.
Remove Participants
To remove any conference participant:
1.
Highlight the participant’s name.
2.
Press
Remove
. You can remove participants only if you initiated the conference.
3.
To end your participation in a conference, hang up or press
EndCall
.
Live Record a Call
Call initiators can use the
LiveRcd
soft key to record an active call, private line or conference call. To record a call:
1.
Press
LiveRcd
. This puts the other party on-hold and initiates a call to the configured live record number.
2.
Press
LiveRcd
again to stop the recording.
Join a Shared-Line Call (SCCP)
Users can join a call on a shared line using the
cBarge
soft key.
To join the shared-line call:
1.
Highlight the remote-in-use call that you want to join.
2.
Press
more
to navigate to
cBarge
and press
cBarge
.
Содержание 7905G/7912G
Страница 24: ...24 ...