Cisco 7401 Скачать руководство пользователя страница 6

Страница: 6 / 40

Install the Parts

This section provides installation instructions for the CompactFlash Disk, Gigabit Interface Converter, and port adapter.

Install the CompactFlash Disk

Figure 1

Inserting the CompactFlash Disk

Insert the CompactFlash Disk into the CompactFlash Disk slot (1) with the label with the vendor name and memory size facing
up. The CompactFlash Disk protrudes when completely inserted.

To remove the CompactFlash Disk, grasp and pull it from the slot (2).

About the CompactFlash Disk

Note

Only the CompactFlash Disk is supported in a Cisco 7401ASR router. Other types of Flash Disks are not supported.

•

The larger the CompactFlash Disk size, the longer the system boot time.

•

The CompactFlash Disk supports online insertion and removal (OIR).

•

Use the CompactFlash Disk to store your configuration files and Cisco IOS software image. The Cisco 7401ASR router has
no onboard Flash memory.

For more information on CompactFlash Disks, see the Cisco 7401 Installation and Configuration Guide.

Insert the CompactFlash Disk

Remove the CompactFlash Disk

57604

Содержание 7401









































Результаты поиска

Содержание 7401

Отзывы:

Похожие инструкции для 7401

Бренды по названию

Популярные бренды

Cisco 7401, Быстрый старт

Результаты поиска

Содержание 7401

Отзывы:

Похожие инструкции для 7401

Бренды по названию

Популярные бренды