background image

3

All users can order monthly or quarterly subscriptions through the online Subscription Store:

http://www.cisco.com/go/subscription

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products 
MarketPlace:

http://www.cisco.com/en/US/partner/ordering/index.shtml

Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems 
Corporate Headquarters (California, U.S.A.) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS 
(6387). 

Documentation Feedback

You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of 
the page.

You can e-mail your comments to [email protected].

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the 
following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtain Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer 
support services. Access the Cisco Product Catalog at this URL: 
http://www.cisco.com/en/US/products/products_catalog_links_launch.html

Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: 
Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking 
Troubleshooting Guide, 
and the Internetworking Design Guide. For current Cisco Press titles and other information, go to 
Cisco Press online at this URL: http://www.ciscopress.com

Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, 
and Cisco products and solutions to help industry professionals get the most from their networking investment. Included 
are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, 
certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL: 
http://www.cisco.com/go/packet

iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for 
executives. You can access iQ Magazine at this URL: http://www.cisco.com/go/iqmagazine

Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in 
designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal 
at this URL: http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html

Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL: 
http://www.cisco.com/en/US/learning/le31/learning_recommended_training_list.html

Содержание 7401









































Отзывы: