Cisco 675E, Руководство по установке оборудования

Страница: 14 / 104

Preface
xiv
Cisco RPS 675 Redundant Power System Hardware Installation Guide
78-15201-04
Organization
This guide is organized into the following chapters:
•
Chapter 1, “Product Overview,” is a physical and functional overview of the
Cisco RPS 675 redundant power system. It describes the features, the LEDs
and includes examples of how the Cisco RPS 675 could be deployed.
•
Chapter 2, “Installation,” contains the procedures on how to install the
RPS 675 on a rack, table, or shelf, and how to connect the RPS 675 to
supported devices.
•
Chapter 3, “Troubleshooting,” describes how to identify and resolve some of
the problems that might arise when installing the switch.
•
Appendix A, “Technical Specifications,” lists the RPS 675 physical and
environmental specifications and the regulatory agency approvals.
• Appendix B, “Connector and Cable Specifications,” describes the
connectors, cables, and adapters that can be used to connect to the RPS 675.
•
Appendix C, “Translated Safety Warnings,” contains translations in various
languages for the safety warnings in this guide.
Conventions
This document uses these conventions and symbols for notes, cautions,
and warnings:
Note
Means reader take note . Notes contain helpful suggestions or references to
materials not contained in this manual.
Caution
Means reader be careful . In this situation, you might do something that could
result in equipment damage or loss of data.