Cisco 6513 - Catalyst Switch, Руководство по установке

Страница: 82 / 254

2-8
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-03
Chapter 2 Ethernet Switching Modules
10 and 10/100 Fiber-Based Ethernet Modules
Software support
•
With Supervisor Engine 2—12.1(2)E
• With Supervisor Engine 32—12.2(18)SXF
•
With Supervisor Engine 32 PISA—12.2(18)ZY
•
With Supervisor Engine 720—12.2(14)SX
•
With Supervisor Engine 720-10GE—12.2(33)SXH
• Catalyst OS—6.4(11)
Queues per port Both modules:
•
Tx—2q2t
• Rx—1q4t
Chassis/slot restrictions No chassis or slot restrictions; the modules can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis.
Bus connection Single connection into the 32-Gbps shared bus
Module upgrades available
PoE support Not available.
Distributed forwarding
support Not available.
Pluggable transceivers
support Not supported.
Digital Optical Monitoring
(DOM) support Not supported.
Module front panel LEDs STATUS
•
Green—All diagnostics pass; the module is operational.
• Orange—The module is booting or running diagnostics; an
overtemperature condition has occurred.
LINK
• Green—The port is active (the link is connected and operational).
•
Flashing orange—The port failed diagnostics and is disabled.
• Orange—The port is disabled.
•
Red—The module is resetting; an overtemperature condition has
occurred.
Note If the module fails to download code and configuration information
successfully during the initial reset, the LED stays red; the module
does not come online.
• Off—The port is not active or the link is not connected.
Table 2-5 WS-X6324-100FX-MM and WS-X6324-100FX-SM Ethernet Module Features (continued)
Feature Description