Cisco 6513 - Catalyst Switch, Руководство по установке

Страница: 106 / 254

2-32
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-03
Chapter 2 Ethernet Switching Modules
10/100 and 10/100/1000 Ethernet Modules
TDR support Not supported
Module front panel LEDs STATUS
• Green—All diagnostics pass; the module is operational.
•
Orange—The module is booting or running diagnostics.
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
•
Red—The module is resetting. The switch has just been powered
on or the module has been hot inserted during the normal
initialization sequence.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
If the module fails to download code and configuration information
successfully during the initial reset, the LED stays red; the module
does not come online.
LINK
•
Green—The port is active (the link is connected and operational).
• Orange—The module or port is disabled through the CLI command
or the module is initializing.
•
Flashing orange—The port is faulty and has been disabled.
• Off—The port is not active or the link is not connected.
PHONE
• Green—The PoE daughter card is installed and detected.
•
Off—The PoE daughter card is not detected or is not installed.
Table 2-19 WS-X6148X2-RJ-45 and WS-X6148X2-45AF Ethernet Modules Features (continued)
Feature Description