Purpose
Command or Action
there are 1200 errored frames in that period (that is, 100
per million for 12 million).
(Optional) Configures the window size (in milliseconds)
for the OAM frame-seconds error event.
frame-seconds window window
Example:
Step 10
The range is 10000 to 900000.
RP/0/RP0/CPU0:router(config-eoam-lm)#
frame-seconds window 900000
The default value is 6000.
The only accepted values are multiples of the
line card-specific polling interval, that is, 1000
milliseconds for most line cards.
Note
(Optional) Configures the thresholds (in seconds) that
trigger a frame-seconds error event. The high threshold
frame-seconds threshold low threshold high threshold
Example:
Step 11
value can be configured only in conjunction with the low
threshold value.
RP/0/RP0/CPU0:router(config-eoam-lm)#
frame-seconds threshold 3 threshold 900
The range is 1 to 900
The default value is 1.
Exits back to Ethernet OAM mode.
exit
Example:
Step 12
RP/0/RP0/CPU0:router(config-eoam-lm)# exit
Enables MIB retrieval in an Ethernet OAM profile or on
an Ethernet OAM interface.
mib-retrieval
Example:
Step 13
RP/0/RP0/CPU0:router(config-eoam)# mib-retrieval
Configures the connection timeout period for an Ethernet
OAM session. as a multiple of the hello interval.
connection timeout <timeout>
Example:
Step 14
The range is 2 to 30.
RP/0/RP0/CPU0:router(config-eoam)# connection
timeout 30
The default value is 5.
Configures the time interval between hello packets for an
Ethernet OAM session. The default is 1 second (
1s
).
hello-interval
{
100ms
|
1s
}
Example:
Step 15
RP/0/RP0/CPU0:router(config-eoam)# hello-interval
100ms
Configures the Ethernet OAM mode. The default is active.
mode
{
active
|
passive
}
Example:
Step 16
RP/0/RP0/CPU0:router(config-eoam)# mode passive
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
52
Configuring Ethernet OAM
Configuring an Ethernet OAM Profile
