
Prerequisites for Configuring Management Ethernet Interfaces
You must be in a user group associated with a task group that includes the proper task IDs. The command
reference guides include the task IDs required for each command. If you suspect user group assignment is
preventing you from using a command, contact your AAA administrator for assistance.
Before performing the Management Ethernet interface configuration procedures that are described in this
module, ensure that these tasks and conditions are met:
• You have performed the initial configuration of the Management Ethernet interface.
• You know how to apply the generalized interface name specification
rack/slot/module/port
.
For transparent switchover, both active and standby Management Ethernet interfaces are expected to be
physically connected to the same LAN or switch.
Note
InformationAboutConfiguringManagementEthernetInterfaces
To configure Management Ethernet interfaces, you must understand the following concept:
Default Interface Settings
This table describes the default Management Ethernet interface settings that can be changed by manual
configuration. Default settings are not displayed in the show running-config command output.
Table 2: Management Ethernet Interface Default Settings
Configuration File Entry
Default Value
Parameter
speed
[
10
|
100
|
1000
]
To return the system to autonegotiate speed, use the
no
speed
[
10
|
100
|
1000
] command.
Speed is autonegotiated.
Speed in Mbps
duplex
{
full
|
half
}
To return the system to autonegotiated duplex operation,
use the
no duplex {full | half}
command, as appropriate.
Duplex mode is autonegotiated.
Duplex mode
mac-address
address
To return the device to its default MAC address, use the
no mac-address
address command.
MAC address is read from the
hardware burned-in address
(BIA).
MAC address
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
12
Advanced Configuration and Modification of the Management Ethernet Interface
Prerequisites for Configuring Management Ethernet Interfaces