5-8
Cisco Secure Desktop Configuration Guide
OL-8607-02
Chapter 5 Setting Up CSD for Microsoft Windows Clients
Defining Location Criteria
Note
If the client has more than one network card, CSD uses only the address of the first card detected.
Registry and File Criteria
Check
Enable identification using registry or file criteria
in the Identification for
<Location>
pane
(
Figure 5-2
) if you want to specify registry key or file criteria to match to qualify a remote client PC to
obtain the access rights associated with the location you are configuring, and click
Configure Criteria
.
The Registry and File Criteria dialog box opens (
Figure 5-3
).
Figure 5-3
Registry and File Criteria
The tables in this window list any registry key and file requirements needed to qualify a remote client to
obtain the access rights associated with the location you are configuring. Each entry is a logical OR
operator (that is, the evaluation result for any entry must be TRUE to assign the location.
Note
To view details in the Registry Criteria or File Criteria tables, float the cursor over the column header
divider. As you do so, it becomes a double, horizontal arrow. Drag the arrow to the left or right to expose
the contents of the column.
Refer to the section that identifies the type of criteria you would like to configure:
•
Registry Criteria
•
File Criteria
