Cisco 5428 - SN Router, Руководство по установке

Страница: 31 / 106

3-5
Cisco AS5400 Universal Gateway Chassis Installation Guide
OL-2847-02 0A
Chapter 3 Installing the Cisco AS5400 and Cisco AS5400HPX Universal Gateways
Connecting to the Network
Figure 3-4 Standard Bracket Installation—Rear Panel Forward
Caution
Do not use the handles on the dial feature cards to assist in lifting the chassis.
Step 2
After the brackets are secured to the chassis, and using the screws that you provide, attach the chassis to
the rack as shown in
Figure 3-5 .
Figure 3-5 Attaching the Chassis to the 19-Inch Rack—Rear Panel Forward
Connecting to the Network
This section describes how to connect the universal gateway to your network. The cables required to
connect to a network are not provided. For ordering information, contact customer service (see the
“Obtaining Technical Assistance” section on page -xi in the Preface ) or see Appendix C, “ Cabling
Specifications ” for cable and port pinouts.
30860
Note: The second bracket attaches to the other side of the chassis.
29034
Note: The second bracket attaches to the rack at the other side
of the chassis. The brackets can also be installed with the
front panel forward.