30-45
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Chapter 30 Configuring Switch Access Using AAA
Configuring Authorization
This example shows how to disable EXEC mode authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization exec disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable enable mode authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization enable disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable command authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization commands disable both
Successfully disabled commands authorization.
Console> (enable)
This example shows how to verify the configuration:
Console> (enable) show authorization
Telnet:
-------
Primary Fallback
------- --------
exec:
deny
enable:
deny
commands:
config:
deny
all:
deny
Console:
--------
Primary Fallback
------- --------
exec:
deny
enable:
deny
commands:
config:
deny
all:
deny
Console> (enable)
Step 3
Disable authorization of configuration
commands. Enter the console or telnet keywords
if you want to disable the authorization only for
the console port or for the Telnet connection
attempts. Enter the both keyword to enable
authorization for both console port and Telnet
connection attempts.
set authorization commands disable [console |
telnet | both]
Step 4
Verify the authorization configuration. show authorization
Task
Command