Cisco 3200 Series, Руководство по настройке программного обеспечения

Страница: 33 / 314

Overview of the Cisco WMIC
Features
9
Cisco 3200 Series Wireless MIC Software Configuration Guide
Universal
workgroup
bridge mode Supported Not supported Enables operation with non-Cisco Aironet
access points.
VLAN 16 unencrypted VLANs,
16 static key VLANs, or
16 dynamic key VLANs
16 unencrypted VLANs,
1 static key VLANs, or
4 dynamic key VLANs
Wireless
encryption/cipher
suites WEP-40, WEP-128, TKIP,
CKIP, CMIC, and
CKIP-CMIC, AES-CCM WEP-40, WEP-128, TKIP,
and AES-CCM CKIP, CMIC and CKIP-CMIC are not part
of 802.11 standard cipher suites.
Maximum
number of
stations with
WEP 255 116
Maximum
number of
stations with
TKIP 256 26
Maximum
number of
stations with
AES-CCM 256 116
Channelization Statically declared as defined
by IEEE 802.11b/g. Channel spacing selected by
using the CLI.
Scanning
enhancements for
faster roaming All Scanning Enhancements
for Faster Roaming are
available. All Scanning Enhancements
for Faster Roaming are
available except “Use First
Better Access Point.” • Synthesizer tuning time
•
Start on Current Channel
• Only Probe Current SSID
•
Shorten Wait time for Probe Response
• Automatically Limiting Frequencies
Scanned
•
Time out the Scan
• Use First Better Access Point
•
Save Best Probe Response
Simple Network
Management
Protocol (SNM)P
MIB IDs Supported Supported for new values The platform-dependent SNMP code was
modified to return new values
(entPhysicalVendorType, System OID, and
Chassis ID).
Dot11 MIB
parameters Supported The dot11 parameters are
returned through the dot11
MIB interface.
Table 1 Differences Between the 2.4-GHz WMIC and the 4.9-GHz WMIC
Feature 2.4-GHz WMIC 4.9-GHz WMIC Comment