Cisco 2651XM-V, Руководство по установке оборудования

Страница: 155 / 198

D-11
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Appendix D Quick Setup By Using the CLI-Based Setup Program
Entering the Initial Configuration Information
Completing the Setup Program
Note
If your switches are stacked and there are multiple console connections to
individual switches in the stack, the initial setup dialog appears in the first console
where the user presses
Enter .
Follow these steps to complete the setup program and to create an initial
configuration for the switch:
Step 1
Enter Yes at the following two prompts.
Would you like to enter the initial configuration dialog? [yes/no]:
yes
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the system.
Would you like to enter basic management setup? [yes/no]: yes
Step 2
Enter a host name for the switch, and press Return .
On a command switch, the host name is limited to 28 characters; on a member
switch to 31 characters. Do not use
-n , where n is a number, as the last character
in a host name for any switch.
Enter host name [Switch]: host_name
Step 3
Enter an enable secret password, and press Return .
The password can be from 1 to 25 alphanumeric characters, can start with a
number, is case sensitive, allows spaces, but ignores leading spaces. The secret
password is encrypted and the enable password is in plain text.
Enter enable secret: secret_password
Step 4
Enter an enable password, and press Return .
Enter enable password: enable_password