Cisco 1841 - 3G Bundle Router Скачать руководство пользователя страница 97 | Manualshive

Страница: 97 / 100

background image

11-11

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

OL-5876-03

Chapter 11 Installing and Upgrading Internal Modules in Cisco 1800 Series Routers (Modular)

Modules Internal to the Cisco 1841 Router

Figure 11-10

Correctly Installed AIM

Applying the AIM Label

The AIM label for the chassis might be in the AIM mounting kit, or it might be attached to the label on
the AIM card. To apply the chassis label, follow these steps:

Step 1

If the chassis label is attached to the label on the AIM card, carefully tear off the chassis label at the
perforation. If the chassis label is in the AIM mounting kit, remove the label from the kit bag.

Step 2

Peel the chassis label from its backing.

Step 3

If there is a suitable space, apply the chassis label to the back of the chassis. If no suitable space is
available on the back of the chassis, apply the label to the top cover at the back edge. The label must be
visible with the chassis installed.

Note

Do not apply the AIM label for the chassis to a blank cover plate; to any removable network
module or interface card; or over any holes, screws, chassis vents, or existing labels.

Closing the Chassis

To close the chassis, follow these steps:

Step 1

Rotate the cover down onto the chassis. Slide the cover back onto the bottom of the chassis. See

Figure 11-11

.

Step 2

Push firmly to close.

Step 3

Turn the router upside-down.

58696

«
...
95
96
97
98
99
...
»

Содержание 1841 - 3G Bundle Router





































































































Отзывы:

Нет отзывов

Похожие инструкции для 1841 - 3G Bundle Router

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 4

Бренд: Juniper Страницы: 502

Бренд: ADTRAN Страницы: 9

Бренд: ForeScout Страницы: 28

Бренд: SyChip Страницы: 24

Бренд: E-Lins Страницы: 113

NSLU2 - Network Storage Link NAS Server

Бренд: Linksys Страницы: 64

Бренд: TRENDnet Страницы: 62

Бренд: insys icom Страницы: 4

Бренд: Lutron Electronics Страницы: 4

ipRocketLink 3086FR

Бренд: Patton electronics Страницы: 12

Бренд: Aaeon Страницы: 57

Бренд: Juniper Страницы: 196

Бренд: NetBurner Страницы: 30

Бренд: EXAGATE Страницы: 7

Бренд: Black Box Страницы: 12

Бренд: Hama Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды