1-36
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
Marking Traffic
Documentation Reference:
Chapter 7, “Marking Traffic”
•
set atm-clp Command, page 1-36
•
set cos Command, page 1-36
•
set discard-class Command, page 1-36
•
set fr-de Command, page 1-37
•
set ip dscp Command, page 1-37
•
set ip precedence Command, page 1-37
•
set mpls experimental Command, page 1-37
•
set mpls experimental imposition Command, page 1-38
•
set qos-group Command, page 1-38
•
Marking Feature, page 1-38
set atm-clp Command
Cisco IOS Release:
Release 12.0(17)SL
Description:
The
set
atm-clp
command was introduced on the PRE2 to set the cell loss priority (CLP)
bit to 1.
Cisco IOS Release:
Release 12.2(28)SB
Description:
This command was integrated in Cisco IOS Release 12.2(28)SB for the PRE2.
Cisco IOS Release:
Release 12.2(33)SB
Description:
This command was introduced on the PRE3 and PRE4.
set cos Command
Cisco IOS Release:
Release 12.2(16)BX
Description:
The
set cos
command was introduced on the PRE2 to set the Layer 2 class of service (CoS)
value of an outgoing packet. This command is available only on the PRE2.
Cisco IOS Release:
Release 12.2(28)SB
Description:
This command was integrated in Cisco IOS Release 12.2(28)SB.
set discard-class Command
Cisco IOS Release:
Release 12.3(7)XI
Description:
The
set discard-class
command was introduced on the PRE2 to mark a packet with a
discard-class value or to drop a specific traffic type during congestion. This command is available only
on the PRE2.
