manualshive.com logo in svg

Cisco 10000 Series, Руководство по настройке

Поделиться
Скачать
Cisco 10000 Series Скачать руководство пользователя страница 165

4-21

Cisco 10000 Series Router Quality of Service Configuration Guide

OL-7433-09

Chapter 4      Attaching Service Policies

Attaching Virtual LAN QoS Service Policies

VLAN QoS Inheritance

The following describes how VLAN traffic inherits QoS policies:

  •

If you attach a service policy only to the physical interface, the aggregate of all of the VLAN 
subinterfaces is subject to the physical interface’s service policy.

  •

If you attach a service policy only to individual VLAN subinterfaces and not to the physical 
interface, only the individual VLAN subinterfaces are subject to the attached service policies.

  •

If you attach service policies to both the physical interface and to individual VLAN subinterfaces, 
the aggregate of all VLAN subinterfaces without a service policy is subject to the physical 
interface’s service policy, and all of the VLAN subinterfaces with a service policy are individually 
subject to their attached service policies.

Restrictions and Limitations for Attaching QoS Services to VLAN Subinterfaces

  •

The Cisco 10000 series router currently supports PPPoE over IEEE 802.1Q VLAN on Gigabit 
Ethernet and Fast Ethernet 8-port half-height line cards. The Fast Ethernet port (fe0/0/0) of the 
performance routing engine (PRE) does not support this feature. This port is for management traffic 
only.

  •

For PRE1 and PRE2, output QoS policies that contain queueing actions must be nested service 
policies. However, for PRE3 and PRE4, there is no such restriction and thereby a flat queueing 
policy can be directly attached to a VLAN subinterface.

Attaching QoS Policies to VLAN Interfaces and Subinterfaces

To attach QoS service policies to VLAN interfaces and subinterfaces, perform any of the following 
configuration tasks:

  •

Attaching QoS Service Policies to Physical Interfaces with VLAN Subinterfaces, page 4-22

  •

Attaching QoS Service Policies to VLAN Subinterfaces, page 4-23

Содержание 10000 Series























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды