VCC-SXCXP3R Rev. 905-0050-00
©2017 CIS Corporation. All rights reserved.
19
8.12. White balance
AnalogControl
BalanceWhiteControl
Off
OnePush
Manual
The following three kinds of modes can be used for white balance control.
1)
OFF
Through output without white balance adjustment.
2)
One push white balance
Execute BalanceWhiteOnePush to adjust white balance.
Shoot an object with no color to entire screen to execute. Approx. 50% of signal level is recommended
to execute. The gain values of Red and Blue after execution can be read out from
BalanceWhiteOnePushGainRed and BalanceWhiteOnePushBlue.
AnalogControl
BalanceWhiteOnePush
(Execute)
BalanceWhiteOnePushGainRed
Read Only
BalanceWhiteOnePushGainBlue
Read Only
3)
Manual white balance
Red and Blue Gain are adjustable with the following commands in the range of x0
～
x8.
AnalogControl
BalanceWhiteGainRed
0 – 8.0
BalanceWhiteGainBlue
0 – 8.0
As to BalanceWhiteGainRed/Blue, the values for OnePush execution shall be reflected first, when
BalanceWhiteControl is selected to Manual. And, any preferred values can be input later.
