VCC-5CXP3NIR
Rev. 905-0123-00
©2018 CIS Corporation. All rights reserved.
10
・
Entire pixels (ROI_OFF)
Link rate
CXP1
CXP2
CXP3
CXP5
CXP6
Exposure delay at normal readout [µs]
※Exposure
delay time (A) on Timing chart
4
8
8
4
4
Exposure delay at overlapping [µs]
※Exposure delay tim e (B) on Timing chart
26-49
19-31
19-31
9-15
9-15
・
Sub Sampling
Link rate
CXP1
CXP2
CXP3
CXP5
CXP6
Exposure delay at normal readout [µs]
※Exposure delay
time (A) on Timing chart
4
8
8
4
4
Exposure delay at overlapping [µs]
※Exposure delay tim e (B) on Timing chart
18-34
14-22
14-22
7-11
7-11
※
The variable value of delay time is determined depending on the settings of its frame rate and exposure time.
Values shall not be changed randomly under fixed condition.
□
Fixed Trigger Shutter Mode
This is a mode to start exposure by inputting trigger signals, and to set its exposure time manually or with preset.
・
Set "TriggerSelectorAndActivation" to "FrameStartRisingEdge" or "FrameStartFallingEdge."
・
Trigger cycle needs to be longer than FVAL period (
≒
1/framerate).
・
Trigger cycle needs to be longer than exposure time.
・
Trigger operation is CLK sync H-V sync reset.
・
Trigger pulse more than 30µs width can be input.
・
The maximum exposure time depends on ROI settings, “PixelFormat”, and link configuration.
Effective Line
～ ～
Exposure Out
Trigger
FVAL
Video Out
LVAL
Effective Line
Image
Header
Idle
Stream data
Stream data
Idle
Idle
Exposure delay time (A)
Cxp Stream
Image
Header
～ ～
Readout time
Exposure time
Trigger input forbidden period
Exposure delay time (B)
