VCC-2CXP6R
Rev.905-0187-02
©2019 CIS Corporation. All rights reserved.
20
When setting several partial scan areas, please set the start position and effective lines trying not to overlap the areas.
□
Total line count per frame = V blanking lines +
Partial effective line 1 + Partial effective lines 2 +
・・・
+ Partial effective lines 8
Please note that sum total of partial effective line numbers from 1~8 (except V blanking lines) has to be less than
1248. V blanking lines at partial mode is 64 or 68H.
□
Frame rate = 1 / (Total line count per frame × Time for 1line)
Time for 1 line
Video output
format
CXP-3
BayerRG/Mono8
6.36
BayerRG/Mono10 7.81
BayerRG/Mono12 9.21
CXP-6
BayerRG/Mono8
3.18
BayerRG/Mono10 3.91
BayerRG/Mono12 4.61
Link rate
Time
for
1H
[us]
□
The line numbers at partial scan setting can be set from 8 lines. Only multiple numbers of 8 can be set.
□
The effective line numbers of the manual shutter setting value at partial scan setting becomes the maximum (except
at ClkSync trigger).
□
When you switch between Full Frame Scan Mode and Partial Scan Mode or when you change Partial scan settings,
the first one frame right after the changes shall be invalid.
*Especially at fixed trigger shutter mode and pulse width trigger shutter mode, input a dummy
Trigger first, and use the next trigger as an actual video signal.
5.18.
White Balance
AnalogControl
BalanceRatioSelector
Red
Blue
BalanceWhiteAuto
Off
Once
BalanceRatio
0.00~8.00
BalanceWhiteAuto
: This is to adjust white balance gain automatically.
Off
: Waiting
Once
: White balance shall be adjusted automatically by one push.
When “Once” of BalanceWhiteAuto is selected, white balance shall be adjusted automatically, and it shall be
returned to the status of OFF.
The new gain of color component selected by BalanceRatioSelector shall be indicated to BalanceRatio.
Shoot an achromatic colored uniform object to full screen, then execute BalanceWhiteAuto. We recommend
you to execute with approx. 50% of signal level.
※ Please execute “Once” of BalanceWhiteAuto when RegionSelector is set to EffectiveRegion.
※ BalanceWhiteAuto cannot be executed when binning or more than two partial areas are set.
The commands below are valid only when BalanceWhiteAuto is Off.
BalanceRatioSelector : This is to select the color component to change by BalanceRatio.
