manualshive.com logo in svg

Cirronet CR-SEH, Руководство пользователя

Поделиться
Скачать
Cirronet CR-SEH Скачать руководство пользователя страница 27

CR-SEH 

CR-SEH Security Commands 

Command Description 

access help 

 

 console [enable|disable] 

 

 

 ip [help 

 

     add <ipaddr> 

 

 

     delete <ipaddr> 

 

     disable 

 

     enable 

 

     show] 

  

show 

Displays command help screen 

Enables/disables password requirement for direct 

console communications.  

Displays command help screen 

Sets IP addresses (up to 10) from which telnet 

sessions will be accepted 

Deletes ipaddr from list of allowed telnet initiators 

Turns off telnet initiator limitation 

Turns on telnet initiator limitations 

Displays telnet initiator limitations settings 

Displays console and IP setting 

ftpw 

Changes the password for FTP sessions 

password <pwd> 

Changes the password for telnet/console sessions 

 

access 

Group of commands that limit access to the CR-SEH through the console port and telnet 
sessions. Note that there is no command to enable or disable the telnet session password. It 
is always enabled. 

 

console enable

 sets the requirement that a password be entered when starting a console 

connection. The password is set using the 

password

 command. The default setting is 

disabled. 

console disable

 removes the password requirement. 

 

ip enable 

sets limitations set on initiating a telnet session to the CR-SEH. When enabled, 

only network devices with IP addresses on the list of IP addresses added can initiate a telnet 
session with the CR-SEH. Up to 10 IP addresses can be added to the list. The list is modified 
with the 

add

 and 

delete

 subcommands. 

ip disable

 allows telnet sessions to be initiated 

from any IP address (a password will still be required). 

show

 will display the setting of the 

ip command and the list of IP addressed entered when enabled. 

ftpw 

This command changes the password required to initiate an FTP session with the CR-SEH. 
The default password is “Cirronet” (without quotes). It is not possible to disable this 
password. 

password 

This command changes the password required to initiate a telnet session with the CR-SEH 
and initiate a serial connection through the console port when enabled. The default password 
is “Cirronet” (without quotes). It is not possible to disable the password requirement for a 
telnet session, but it is possible to disable the password requirement for the console 
connection. 

 2000- 2004 Cirronet

 Inc 

22 

M-2411-0013 Rev A 

 

Содержание CR-SEH



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды