Touch1 LV Checkout Manual - Page 3
Set Up
Packing List:
You should have received the following items with your
Touch1 LV Performance Verification
Kit
:
•
This manual which includes a copy of a Touch1 LV Certificate of Calibration
•
0.1% Resistor Leak Adapter
•
T1/H+ Capacitance/4-Wire Adapter
•
Zero Ohm Adapter
Tester Preparation:
To prepare the tester for calibration, do the following:
•
Install any expansion boxes you want to use. For information on how to do this, see
the online help system or your users manual.
Note: The examples in this manual show a Touch1 LV with no expansion boxes.
•
Connect the power cord to the tester. Plug the tester into a grounded power outlet.
•
To print Tester Checkout results, connect a printer to the tester using the parallel port.
•
Depending on your calibration system requirements, you may need to prepare a form
to record the results of the calibration. At the end of this manual is a
Touch1 LV
Certificate of Calibration
. If you use this form, make a photocopy so you can maintain
the master for the next time you perform the calibration tests.
