Setting Up the CH+ Tester
4
Assemble the CH+ System
1. Remove the Phillips-head screws that lock
the back cover plates on the base unit and
scanner boxes.
2. Pinch the latch tabs toward each other as
shown, and remove the back cover plates.
3. Stack the scanner box(es) on top of the base
unit.
Important:
The base unit is not designed to support
the weight of more than 4 scanner boxes. For more
than 4 scanner boxes, we suggest you rack mount the
CH+ system. See
Rack Mounting
at the end of this
procedure.
Note: Each scanner box has two box-to-box cables
sitting inside the case.
Back
Cover Plate
Phillips
Screw
Latch Tabs
Max
4 Boxes
Box-To-Box Cables
