Circutor RAPTION 150C CCS CHA, Инструкция по эксплуатации

Страница: 48 / 120

Raption 150C
Instruction Manual 48
4 — LO G G I N G I N
After you’re complete with the setting up as described in the section above, you are ready
to start logging into your router and start configuring it. This example shows how to connect
through WiFi:
For cibersecurity reasons, modem’s Wi-Fi connection is disabled by default.
In order to enable it, remember to adjust it in Charge Point side, as explained
in
section 4
.
4.2.-
At your service computer, look for access point named
ChargePoint_xxxxxxxxxxxx
(where “x” means the MAC Address), and connect on it.
4.1.-
Connect your Ethernet cable in the LAN port and do all the settings being locally
connected (it can also be done from the WAN port when WAN port is configured as a LAN).