Circutor RAPTION 150C CCS CHA, Инструкция по эксплуатации

Страница: 108 / 120

Raption 150C
Instruction Manual 108
10
This section shows how to manage the output power delivered by the Charge Point for CCS
and CHA. To do this action you have to keep connected through the program
PowerStudio
client
software.
Limiting the output power will be useful when the input power supply for the Charge Point is
not enough powerful to feed and keep a good level of charge for electric vehicles.
The power reduction can be done for CCS and CHA plugs, both in watts.
Before apply any adjustment, it is important to understand the way the power of this Charge
Point works.
There is a total of 6 power modules, divided in to blocks of 3 each one. When there is only
one car charging, the two blocks work for the plug in use. If there are two cars charging, each
block will supply each one of the vehicles. This means that maximum power to be delivered
when charging two cars simultaneously is 75kW (3 power modules x 25kW each one = 75kW).
CCS cable supports 375A. CHAdeMO only 200A. Current is also restricted when there are two
cars charging simultaneously, every power block can provide a maximum value of 250A.
Limits applied are permanent, regardless of whether one or two cars are charging.
B
Power Modules operation
A
Introduction