Circutor PV-Monitor-M, Инструкция по эксплуатации

Страница: 27 / 32

27
Instruction Manual
PV-Monitor-M
6�4�1� CONFIGURATION OF THE ALARM WARNINGS SENT VIA E-MAIL
Open the Settings tab to configure the notifications of alarms sent via e-mail.
You can configure the following parameters on this screen:
SMTP server configuration:
The operator of the e-mail server is entered in this section.
Mail address
The e-mail address at which you wish to receive the notifications.
Password, Password confirmation
The password of the e-mail account.
Press the Apply button to save the configuration.
6�4�2� CONFIGURATION OF ALARMS
The alarms of the PV-Monitor-M are deactivated by default. They can be activated via the
Events tab in
Figure 22
.
The Events tab is shown in
Figure 23�
Figure 23:Alarm setup screen�
To activate an alarm, click on the button. The screen shown in
Figure 24
will open.
Figure 24: Configuration of the alarms, entering the e-mail address.
Enter the e-mail address at which you wish to receive the alarm notification and press Add�
Press Accept to complete the configuration process.