Circutor PV-Monitor-M, Инструкция по эксплуатации

Страница: 22 / 32

22
PV-Monitor-M
Instruction Manual
The alarms are grouped into 4 categories:

Inverter alarms: reverse current detection

PV generator production alarms (CDP modulation)

DC Imbalance A string alarm

Loss of communications: PV-Monitor-M does not communicate with CDP / TRH-
16
/
MET-485
probe.
At the top of the widget, when an alarm is activated, the alarm symbol,
Figure 16
, is displayed
and the RESET button appears, allowing the alarm to be deactivated for 30 minutes.
If after 30 minutes, the condition that activates the alarm continues to be met, the alarm bell and
the RESET button will reappear.
If the radiation sensor is not obtaining a radiation greater than 200 W/m
2
, the utilization rate is
displayed in gray,
Figure 16
.
Figure 16: Utilization rate�
6�1�4� MONTHLY RESUME
The Indicators widget,
Figure 17,
shows:

The PV production of the current month, in kWh.

The savings achieved during the current month, in €

The kg of equivalent CO
2
�