Circutor PV-Monitor-M, Инструкция по эксплуатации

Страница: 12 / 32

12
PV-Monitor-M
Instruction Manual
5�- START-UP
Follow these steps to start-up the PV-Monitor-M :
5.1.- STEP 1: HARDWARE INSTALLATION
Install all system devices. Follow the instructions of the installation manual of each device and
the connection diagram in section
“3.4.- CONNECTION DIAGRAMS”
The PV-Monitor-M system is composed of the following elements:

Dynamic power controller, CDP-0 .

PV-Monitor-M

Router,
to create the internal communications network.

TRH16, multi-channel DC voltage and current analyzer.

MET-485 , Radiation probe, ambient temperature and PV modules temperature.

M/TR-25, measurement module for current circuits.
PV-Monitor-M
CDP
TRH16
M/TR-25
Router customer
Router CIRCUTOR
MET-485 sensor
Figure 5: PV-Monitor-M System�