Circutor DHC-96 CPM, Инструкция по эксплуатации

Страница: 9 / 56

9
Instruction Manual
DHC-96 CPM 1500
3�2�- INSTALLATION
Terminals, opening covers or removing elements can expose parts that are hazard-
ous to the touch while the device is powered. Do not use the device until it is fully
installed.
The device should be installed inside an electric panel or enclosure, and panel-mounted.
To install it, take the following steps:
1�- Make a cut in the panel, according to the dimensions in
Figure 1
�
91
44
Figure 1: Cut in the panel�
2�-
Remove the device’s fixing clips (
Figure 2
).
Clip de fijación / Fixing clip
Figure 2: Fixing clips�
3�-
Insert the device into the cut in the panel.
4�- Fit the fixing clips until the device is fixed to the panel.
The device should be connected to a power circuit protected by a fuse with a maximum nominal cur-
rent of 0�25 A .