Circutor DHB-302, Инструкция по эксплуатации

Страница: 38 / 70

4�6�7�4� ANALOgUe OUTpUT: Type
(
DHB-324
model)
This screen is used to select the type of analogue output.
The screen flashes between the symbol and the configured value (
figure 43
).
figure 43: Analogue output configuration screen: type.
To edit the parameter, press the button.
The following types can be selected:
Current 0 ... 20 mA. Voltage 0 ... 10 V.
Current 4 ... 20 mA.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
figure 43
.
To move to the next parameter on the menu, press the button.
Default value : Current 0 ... 20 mA.
4�6�7�5� MODBUS COMMUNICATIONS: BAUD RATe ( DHB-324 model)
Screen used to configure the baud rate of the RS-485 port.
The screen flashes between the symbol and the configured value (
figure 35
).
figure 44: Modbus communications configuration screens: Transmission speed.
To edit the parameter, press the button.
The options available are:
38400 bauds. 4800 bauds.
38
DHB-302 DHB-324
Instruction Manual